Key Features:

Dead Simple for musicians to use

Very Low Cost

State of the Art Technology
¤ Digital control over your Analog designs
¤ Put your company way ahead of the competition
¤ Consumers will soon expect it
¤ Robust, 128 program storage
¤ Backwards-compatible with MIDI and CV/pulse-dependent devices

Marketing +
¤ Easy to create stand-alone pedals that can be used traditionally and tested in-store
¤ Use PedalSync and Tru-Foot trademarks on your devices and in advertising
¤ Links to your products from the PedalSync website

Manufacturing efficiency
¤ Scalable - combine chips like building blocks to make elaborate designs
¤ Efficiently Designed to ensure Low part count
¤ Thru-Hole or SMT
¤ Wide range of chips with many more coming soon

Security
¤ Much harder to copy your designs
¤ Optional labels specific to your product

Molten Voltage product support
¤ Development boards available
¤ Low cost customization to meet your specs

Chips & Modules:

¤ Master Controller and Module

¤ Tru-Foot™ LFO (MIDI, Tap, Pulse, or Pot control) and Module

¤ Four Pots and Module

¤ Relay Bypass and Modules

¤ 4 Presets and Module

¤ Pulse Output

¤ MIDI Pulse

¤ Tap/Pulse Converter

¤ 9 Switches

¤ many more to come!

The PedalSync Master Control Development Board sends Program Change, Clock, and Self-Programming commands to other PedalSync devices. Master Controller Datasheet

A fully-functional master controller for the PedalSync system which includes: large 3-digit display; program select pot; start/stop, down, up, and tap/save buttons; clock and tempo LEDs; PCB mounted 5 pin jack; Master Control chip and all other necessary components

Available fully functional or with header pins exposed allowing it to be used as the PCB for a name-brand PedalSync controller.

Designed with the End User in mind.

The Master Control interface has been designed to make switching and storing programs as simple as possible so the end-user can concentrate on making music.

Programs are selected using the Up and Down buttons or by turning the Program Select knob. The selected program number is displayed on a large bright 3-segment LED display. The selected program is engaged by pressing the Start/Stop button.

Making all connected PedalSync devices save their current settings is even easier - simply hold down the Tap/Save button for 2 seconds and BOOM - done!

Tempo Control

The Master Control interface sends out a clock signal so all sequencing, oscillating, and repeating PedalSync chips are locked in.

Tempo can be continually adjusted on-the-fly with the Tap Button, using the Up and Down buttons, using the potentiometer, or with a pulse input. An LED indicates the current tempo, allowing users to adjust the tempo when the clock output is stopped.

The Master Control chip stores the tempo associated with each of the 128 programs. Alternatively, a program can be made to use the existing tempo for when multiple programs are used in a single song.

Backwards-compatible with MIDI

The PedalSync Master Control chip also sends out standard MIDI Start, Stop, and Clock messages as well as Song Select and Program Change messages.

As a result, the PedalSync Master Control chip can synchronize an entire rig including MIDI-enabled rack effects, pedals, modular synths, and amplifiers.

Master Control Development Board

Master Control Dev. Board - Complete:

1-4 @ $59.95
5-9 @ $54.95
10-24 @ $51.95
25-49 @ $48.25
50+ @ $44.95

Master Control Dev. Board - headers exposed
as shown + display

1-4 @ $52.95
5-9 @ $47.95
10-24 @ $44.95
25-49 @ $41.25
50+ @ $37.95

Waveform
Users select Sine, Square, Triangle, or Tru-Foot™. With the Duty Cycle pot, the Triangle waveform can be transformed into a sawtooth up or down.

The Tru-Foot™ waveform realistically emulates the feel of a foot rhythmically controlling a wah-type pedal. It is particularly effective with voltage-controlled filter designs.

Clock or Pot timing
The LFO timing source is selected with a momentary switch. The program default is Pot, allowing stand-alone effects that do not need an external clock signal.

Speed
The Speed pot adjusts the base LFO rate between 24 and 240 bpm. This range can be further adjusted using the Ratio control from 3 bpm to 960 bpm.

Ratio
The Ratio pot multiplies or divides the LFO speed relative to the incoming clock based on musical subdivisions: two whole notes; whole note; half note; half note triplet; quarter note (tap speed); quarter note triplet; 8th note; 8th note triplet; 16th note. As a result, synchronized devices can oscillate at different yet complimentary rates.

Offset
The Offset pot adjusts the waveform against the incoming clock with up to 360 degrees of phase shift. The LFO can accent, syncopate, push the beat, or get right in the pocket.

Duty Cycle
The Duty Cycle pot adjusts the relative playback speed of the first and second half of the waveform to make the output swing. The thirteen duty cycle ratios correspond to the most common musical subdivisions: 1/20; 1/8; 1/6; 1/4; 1/3; 3/8; 1/2; 5/8; 2/3; 3/4; 5/6; 7/8; 19/20.

Five Simultaneous Outputs

Tru-Foot™ LFO chip programs are stored by toggling a switch or upon a command from the PedalSync Master Control chip.

Programs are recalled using the PedalSync Master Control chip (MV-58), standard MIDI Program Change messages, or the PedalSync 4 Presets chip (MV-59).

Extensive smoothing and interpolation algorithms provide seamless transitions between programs and allow real-time control.

MV-55 loads program 1 automatically on startup, while MV-55B reads the potentiometers and switches.

Tru-Foot™ LFO Module:

1-4 @ $44.95
5-9 @ $41.95
10-24 @ $38.95
25-49 @ $36.50
50+ @ $34.95

Coming Soon:
Output Voltage Conversion Module

The PedalSync Four Pots chip MV-56 stores and recalls up to four potentiometer settings for 128 different programs. Four Pots Datasheet

The chip sends real-time or programmed resistance data to low cost Microchip digital potentiometers (MCP4151), which can be designed to control any current or voltage.

In addition to the pot settings, the chip also stores the Bypass status and two (2) more user defined momentary switch inputs and pin outputs that can control other device features like alternate signal paths. The Bypass status is indicated by an LED which controls our Relay Bypass chip.

Four Pots chip programs are stored by toggling a switch or upon a command from the PedalSync Master Control chip.

Programs are recalled using the PedalSync Master Control chip (MV-58), standard MIDI Program Change messages, or the PedalSync 4 Presets chip (MV-59).

Four Pots chip

MV-56:

1-9 @ $12.45
10-24 @ $11.50
25-49 @ $10.75
50-99 @ $9.95
100+ @ $9.45

Four Pots Module:

1-4 @ $44.95
5-9 @ $41.95
10-24 @ $38.95
25-49 @ $36.50
50+ @ $34.95

PedalSync Relay Bypass Chips (MV-57 and MV-57B)

PedalSync Relay Bypass chip MV-57 receives a signal from other PedalSync chips or any 5-volt logic source and silently switches a relay in response. Relay Bypass chip MV-57B is controlled via a momentary switch, allowing true bypass designs without the big blue switch. The Relay Bypass chips feature an output muting signal, virtually eliminating extraneous switching noise.

A DPDT latching relay (Panasonic TQ2-L-5V) connects directly to the chip. Two status LEDs also connect to the chip indicating whether or not the relay is in bypass mode.

What user wouldn't want to store and recall the bypass status for 128 setups.

The Relay Bypass chip also features a light show and automatic relay reset on startup.

See the Relay Bypass Datasheet for more information.

Relay Bypass chips

MV-57 and MV-57B:

1-9 @ $5.95
10-24 @ $5.45
25-49 @ $4.85
50-99 @ $4.25
100+ @ $3.95

PedalSync Relay Bypass Module (Logic-Controlled)

The PedalSync Relay Bypass Module for MV-57 is designed for control by an external logic source input, such as the ones provided by the PedalSync 9 Switches or Four Pots chips.

The Relay Bypass Module is ideal for effect, pedalboard, or loop box designs, as it contains all parts for the momentary muting circuit which virtually eliminates switching noise.

For stereo applications, a single momentary switch can operate two modules.

This compact (.85 x 1.5") module features 2x 5-pin 0.1" pitch headers set 1.3" apart.

The Assembled Modules can be ordered with or without the pins in the header holes.

The headers provide connections for power input, audio signals, momentary switch, and two optional LEDs. The module also features sockets for the chip and relay.

Input Voltage = 5VDC filtered.

See the Relay Bypass Datasheet for more information.

Logic-Controlled Relay Bypass Module -Assembled:

1-9 @ $17.95
10-24 @ $16.85
25-49 @ $15.95
50-99@ $15.50
100+ @ $14.95

Kit, $5 less than assembled

PCB only

1-9 @ $2.95
10-24 @ $2.25
25-49 @ $1.95
50-99@ $1.75
100+ @ $1.45

PedalSync Relay Bypass Module (Momentary Switch)

The PedalSync Relay Bypass Module for MV-57B is designed to sit in a 9-volt battery compartment and connect to a 9-volt power supply, allowing easy, silent true-bypass retrofitting of your vintage pedals.

The Relay Bypass Module is also ideal for effect, pedalboard, or loop box designs, as it employs the same momentary muting circuit which virtually eliminates switching noise.

For stereo applications, a single momentary switch can operate two modules.

This compact (.85 x 1.5") module features 2x 5-pin 0.1" pitch headers set 1.3" apart.

The Assembled Modules can be ordered with or without the pins in the header holes.

The headers provide connections for power input, audio signals, momentary switch, and two optional LEDs. The module also features sockets for the chip and relay.

Input Voltage = 7-30VDC.

See the Relay Bypass Datasheet for more information.

Momentary Switch Relay Bypass Module -Assembled:

1-9 @ $17.95
10-24 @ $16.85
25-49 @ $15.95
50-99@ $15.50
100+ @ $14.95

Kit, $5 less than assembled

PCB only

1-9 @ $2.95
10-24 @ $2.25
25-49 @ $1.95
50-99@ $1.75
100+ @ $1.45

The PedalSync 4 Presets chips MV-59 and MV-59B sequentially send MIDI Program Change messages 1-4 on Channel 15 each time a momentary switch is pressed, and feature a power-on light show.

If the device is designed for dual-use (PedalSync and Stand-Alone), a custom latching network interrupts and overrides any other incoming control signal, giving the 4 Presets signal priority.

Because all the primary PedalSync chips can be programmed separately (without the Master Control signal), users can switch the stand-alone device to one of the four presets, adjust their settings, and program those settings by toggling the PGM switch.

3 different LED indicator options are available from the same chip.

Custom programming is also available.

See the 4 Presets Datasheet for more information.

4 Presets chips

MV-59 and MV-59B:

1-9 @ $5.95
10-24 @ $5.45
25-49 @ $4.85
50-99 @ $4.25
100+ @ $3.95

The PedalSync Pulse Output chip MV-60 sends two independent pulse outputs synchronized to the incoming clock, and stores and recalls each output's Ratio, Offset, and Bypass Status.

This chip is designed to control BOSS™ effects that accept a pulse input such as the PH-3 Phase Shifter, AW-3 Dynamic Wah, and the DD-7 Delay. Any other device that allows a pulse timing input can be similarly controlled.

MV-60 is also compatible with voltage controlled modular synth sequencing designs.

See the Pulse Output Datasheet for more information.

see Tru-Foot LFO, above, for a description of the Ratio and Offset controls

Pulse Output chip

MV-60:

1-9 @ $11.95
10-24 @ $11.25
25-49 @ $10.75
50-99 @ 9.95
100+ @ $9.25

The PedalSync MIDI Pulse chip MV-61 sends a MIDI tempo signal compatible with most popular Line 6™ MIDI devices. The output is synchronized to the incoming clock. The chip stores and recalls the Ratio, Offset, and Bypass Status.

see Tru-Foot LFO, above, for a description of the Ratio and Offset controls

MIDI Pulse chip

MV-61:

1-9 @ $11.95
10-24 @ $11.25
25-49 @ $10.75
50-99 @ $9.95
100+ @ $9.25

The PedalSync 9 Switches chip MV-62 is designed for pedalboard switching controls using the extremely quiet PedalSync MV-57 Relay Bypass system.

MV-62 works well with any other application where up to 9 separate momentary switches control the logic state of 9 separate outputs and the on/off states must be stored and recalled.

Because these chips can be combined like building blocks, there exists no limit on the size of your design.

See the 9 Switches Datasheet for more information.

9 Switches chip

MV-62:

1-9 @ $11.95
10-24 @ $11.25
25-49 @ $10.75
50-99 @ $9.95
100+ @ $9.25

The PedalSync Tap/Pulse Converter chip MV-52B allows you to connect a sophisticated, compact, and highly accurate Tap Tempo controller to your circuit with a minimum of external components.

The Tap/Pulse Converter chip MV-52B was designed primarily to provide precision tap input timing control for chips and circuits that incorporate pulse-activated triggers or external clock inputs such as sequencers and timers.

MV-52B may just as easily be used as a pulse converter, as it provides five (5) simultaneous, synchronized pulse outputs.

See the Tap/Pulse Converter Datasheet for more information.

Tap/Pulse Converter chip

MV-52B:

1-9 @ $5.95
10-24 @ $5.50
25-49 @ $4.95
50-99 @ $4.50
100+ @ $3.95

 

Follow Molten Voltage on Facebook for PedalSync updates:

Molten Voltage

.:.

 

Member of NAMM (National Association of Music Merchants)

 

Available at:

Small Bear Electronics

or contact us directly at

info@PedalSync.com